(5 PCS) ICTE22 THOPMSON CSF TVS Diodes - Transient Voltage Suppressors
Tax included.
THIS LISTING IS FOR (5 PCS) OF ICTE22 BY THOMPSON CSF
TVS Diodes - Transient Voltage Suppressors
The ICTE/MPTE series 1500 W transient suppressors are designed
specifically for protection of CMOS, NMOS, BiMOS, and other
integrated circuits available today for TTL, DTL, ECL, RTL, and
linear functions. This series offers the lowest clamping voltages.
FEATURES
• Stand-off voltage range 5 to 45 Volts
• Uni-directional and Bi-directional
• Glass passivated junction
• Very low clamping voltages
• 100% surge tested
MAXIMUM RATING
• Peak Pulse Power (Ppk): 1500 Watts (10 x 1000μs) @25°C
(see diagram on page 3 for wave form)
• 5 watt steady state
• Response time: 1 x 10-12 seconds (theoretical)
• Forward surge rating 200 Amps, 8.3ms half sine wave, (unidirectional
devices only)
• Operating & storage temperature: -55°C to +150°C
MECHANICAL CHARACTERISTICS
• Case: DO-201AD: Molded plastic over glass
passivated junction
• Terminals: Axial leads, solderable per MIL-STD-202
Method 208
• Solderable leads = 230°C for 10 seconds (1.59mm from case)
• Marking: cathode band, (positive terminal, uni-directional
devices only), device code, logo
• Weight: 1.5 grammes (approx)
TVS Diodes - Transient Voltage Suppressors
The ICTE/MPTE series 1500 W transient suppressors are designed
specifically for protection of CMOS, NMOS, BiMOS, and other
integrated circuits available today for TTL, DTL, ECL, RTL, and
linear functions. This series offers the lowest clamping voltages.
FEATURES
• Stand-off voltage range 5 to 45 Volts
• Uni-directional and Bi-directional
• Glass passivated junction
• Very low clamping voltages
• 100% surge tested
MAXIMUM RATING
• Peak Pulse Power (Ppk): 1500 Watts (10 x 1000μs) @25°C
(see diagram on page 3 for wave form)
• 5 watt steady state
• Response time: 1 x 10-12 seconds (theoretical)
• Forward surge rating 200 Amps, 8.3ms half sine wave, (unidirectional
devices only)
• Operating & storage temperature: -55°C to +150°C
MECHANICAL CHARACTERISTICS
• Case: DO-201AD: Molded plastic over glass
passivated junction
• Terminals: Axial leads, solderable per MIL-STD-202
Method 208
• Solderable leads = 230°C for 10 seconds (1.59mm from case)
• Marking: cathode band, (positive terminal, uni-directional
devices only), device code, logo
• Weight: 1.5 grammes (approx)
