(10pcs)SN74ABT126DR Buffer/Line Driver 4-CH Non-Inverting 3-ST BiCMOS
Tax included.
This listing isfor 10 pcs.
Typical VOLP (Output Ground Bounce)
<1 V at VCC = 5 V, TA = 25°C
High-Impedance State During Power Up
and Power Down
High-Drive Outputs (−32-mA IOH, 64-mA IOL)
Ioff and Power-Up 3-State Support Hot
Insertion
Latch-Up Performance Exceeds 500 mA Per
JESD 17
ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
SN54
Description: The ’ABT126 bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled
when the associated output-enable (OE) input is low.
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down.
However, to ensure the high-impedance state above 2.1 V, OE should be tied to GND through a pulldown
resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.