(1 PC) W741E202 WINBOND 4-BIT FLASH MICROCONTROLLER PDIP-28

GENERAL DESCRIPTION

 The  W741E20X  is  a  high-performance  4-bit  microcontroller  (μC)  that  provides  an  flash  EEPROM  for  the program memory. The device contains a 4-bit ALU, two 8-bit timers, a divider, a serial port, and five 4-bit I/O ports (including 3 output port for LED driving). There are also seven interrupt sources and 8-level  subroutine  nesting  for  interrupt  applications.  The  W741E20X  has  two  power  reduction  modes,  hold mode and stop mode, which help to minimize power dissipation.  The  W741E20X  is  suitable  for  end  product  manufacturer  engineering  testing  and  earlier  samples  before mass production. 

FEATURES

 •  Operating voltage: 2.4V−5.5V

 •  Crystal or RC oscillation circuit can be selected by the code option − Crystal/Ceramic oscillator: up to 4 MHz − RC oscillator: up to 4 MHz 

• Both in crystal or RC oscillator operation mode, high-frequency (400 KHz to 4 MHz) or low-frequency (32.768 KHz) oscillation must be determined by the code option  

 •  Memory  − 2048 × 16 bit program flash EEPROM (including 2K × 4 bit look-up table) − 128 × 4 bit data RAM (including 16 working registers) 

•  21 input/output pins  − Input/output ports: 4 ports/16 pins − Serial input/output port: 1 port /4 pins (high sink current for LED driving) − MFP output pin: 1 pin (MFP) 

•  Power-down  mode  − Hold function: no operation (except for oscillator) − Stop function: no operation (including oscillator) 

•  Seven types of interrupts − Five internal interrupts (Divider 0, Timer 0, Timer 1, and Serial I/O) − Two external interrupts (Port RC and INT pin) 

•  MFP output pin  − Output is software selectable as modulating or nonmodulating frequency  − Works as frequency output specified by Timer 1

•  Built-in 14-bit clock frequency divider circuit 

•  Two built-in 8-bit programmable countdown timers 

− Timer 0: One of two internal clock frequencies (FOSC/4 or FOSC/1024) can be selected 

− Timer 1: Offers auto-reload function and one of two internal clock frequencies (FOSC or FOSC/64)       can be selected or falling edge of pin RC.0 can be selected (output through MFP pin) 

•  Built-in 18/14-bit watchdog timer selectable for system reset 

•  Powerful instruction set: 118 instructions  •  8-level subroutine (include interrupt) nesting