(1 PAIR) WE15-A1130 & WS15-D1130 SICK OPTICS Through-beam photoelectric sensor

  • $29.95
    Unit price per 
Tax included.

Only 85 left!

THIS LISTING IS FOR (1 PAIR) WE15-A1130 & WS15-D1130 BY SICK OPTICS
SICK Optics WS15-D1130 / WE15-A1130. 
Photo-electric sender and receiver pair detects the presence of an object when the beam between the two is interrupted. Useful in automation, alarm systems and door annunciators. When the beam is broken, the receiver produces a current that can be used to trigger an audio-visual signal or relay-operated device. 5 Meter range. Built-in LED alignment and power indicators. Modules are 38 x 21 x 16.2mm and can be front or side-mounted. Front-mount hardware is included. Operate on 10-30Vdc. Power supply not included. cULus.

· Operating voltage: 10-30VDC Class 2
· Output: ≤ 100Ma
· PNP / NPN output
· Range: 5 Meters
· Red pin-point LED
· Front or side mount: M18 x1 threaded bushing with snap ring and plastic nut. / Through holes on 24.1mm mounting centers.
· High immunity to ambient light due to background suppression that ignores stray background reflections.
· Highly visible LED indicators to reduce set-up time and simplify troubleshooting.
· 6' cables
Through-beam photoelectric sensor
Sensor/ detection principle Through-beam photoelectric sensor Dimensions (W x H x D) 16.2 mm x 48.5 mm x 31.9 mm Housing design (light emission) Hybrid Thread diameter (housing) M18 x 1 Sensing range max. 0 m ... 5 m Sensing range 0 m ... 3.8 m Type of light Visible red light Light source LED 1) Light spot size (distance) Ø 160 mm (4 m) Angle of dispersion 1.5° Wave length 650 nm Adjustment None

Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption ≤ 30 mA 3)

1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) Signal transit time with resistive load. 5) With light/dark ratio 1:1. 6) Do not bend below 0 °C. 7) A = VS connections reverse-polarity protected. 8) B = inputs and output reverse-polarity protected. 9) D = outputs overcurrent and short-circuit protected. 10) Reference voltage: 50 V DC.

Output type PNP NPN Switching mode Dark switching Dark switching Output current Imax. ≤ 100 mA Response time ≤ 1.4 ms 4) Switching frequency 350 Hz 5) Connection type Cable, 4-wire, 2 m 6) Cable material PUR Conductor cross-section 0.14 mm² Circuit protection A 7) B 8) D 9) Protection class II 10) Weight 40 g Housing material Plastic, ABS Optics material Plastic, PMMA Enclosure rating IP67 Items supplied Snap-ring and M18 nut Ambient operating temperature –25 °C ... +55 °C Ambient storage temperature –25 °C ... +70 °C UL File No. NRKH.E189383 & NRKH7.E189383 Part number of individual components 2048402 WS15-D1130 2048403 WE15-A1130